World Trade Center, Collapse of The 13
World Trade Center, Collapse of The 13 : Mechanics of Twin Towers' Collapse: (1) Collapse Initiation: After the planes hit the buildings, but before the buildings collapsed, the cores of both towers consisted of three distinct sections. Above and below the impact floors, the cores consisted of what were essentially two rigid boxes; the steel in these sections was undamaged and had undergone no significant heating. The section between them, however, had sustained significant damage and, though they were not hot enough to melt it, the fires were weakening the structural steel. As a result, the core columns were slowly being crushed, sustaining plastic and creep deformation from the weight of higher floors. As the top section tried to move downward, however, the hat truss redistributed the load to the perimeter columns. Meanwhile, the perimeter columns and floors were also being weakened by the heat of the fires, and as the floors began to sag they pulled the exterior walls inwards. In the case of 2 WTC, this caused the eastern face to buckle, transferring its loads back to the failing core through the hat truss and initiating the collapse. In the case of 1 WTC, the south wall later buckled in the same way, and with similar consequences
No records Found