(n.) Geophysics. A set of numerous closely-spaced seismic lines that provide a high spatially sampled measure of subsurface reflectivity. Typical receiver line spacing can range from 300 m [1000 ft] to over 600 m [2000 ft], and typical distances between shotpoints and receiver groups is 25 m [82 ft] (offshore and internationally) and 110 ft or 220 ft [34 to 67 m] (onshore USA, using values that are even factors of the 5280 feet in a mile). Bin sizes are commonly 25 m, 110 ft or 220 ft. The resultant data set can be "cut" in any direction but still display a well sampled seismic section. The original seismic lines are called in-lines. Lines displayed perpendicular to in-lines are called crosslines. In a properly migrated 3D seismic data set, events are placed in their proper vertical and horizontal positions, providing more accurate subsurface maps than can be constructed on the basis of more widely spaced 2D seismic lines, between which significant interpolation might be necessary. In particular, 3D seismic data provide detailed information about fault distribution and subsurface structures. Computer-based interpretationand display of 3D seismic data allow for more thorough analysis than 2D seismic data. See: Acquisition, Bin, Crossline, In-Line, Migration, Two-Dimensional Seismic Data. More Details: Seismic Tools for Reservoir Management