A chemical compound that contains a cyano functional group, CN-. A chemist would say that the cyanide ion has a single negative charge and consists of a carbon atom that is triply bonded to a nitrogen atom, -C≡N: . Cyanide is often used a shorthand term for hydrogen cyanide, HCN, also called hydrocyanic acid, ahighly toxic gas and the simplest example of a cyanide compound. Nitriles are organic compounds that contain a cyanide unit. These have the generic chemical formula RCN (where R = an organic group) and are sometimes referred to as organic cyanides. Isonitriles, isocyanates, and isocyanides all have CN subunits in them, but are not considered cyanides because of the way that they bond to other atoms and their correspondingly different chemical reactivity. Additional Info: The free cyanide anion, CN-, in aqueous solution is highly toxic (See: MSDS Relevance below). When cyanide enters the body it binds tightly to an important body enzyme called cyctochrome oxidase. Normally, this enzyme is a catalyst in the oxygenation of bodily tissues, but when cyanide is bound the oxidase can no longer function and the cells of the body are deprived of oxygen. Exposure to 300 ppm of hydrogen cyanide byinhalation can be fatal within minutes and lower doses can endanger life. The high toxicity of HCN was once exploited for the execution of prisoners in several US states; the HCN was generated as needed by dropping NaCN (sodium cyanide) into a solution of sulfuric acid. See: The last link under Additional Reading (below) for more information. Ingestion of 100 to 250 milligrams of NaCN or KCN (potassium cyanide) can also be fatal as can absorption thorough injured skin. Solutions of sodium or potassium cyanide are extremely basic; the pH of a 0.1 M solution is approximately 11, meaning that it is quite corrosive. At low doses, your body can cope with minute amounts of cyanide (it occurs naturally in certain foods, albeit in small amounts), but a "large" sudden dose (acute exposure) poses a serious medical emergency. Antidotes for cyanide poisoning include amyl nitrate, sodium nitrite, and intravenous sodium thiosulfate. These can be quite effective if administered promptly by a trained medical professional. Cyanides which exist as simple salts (i.e they dissolve in water to form cyanide ions) usually contain the word "cyanide" as the last word in their name; for example, sodium cyanide (NaCN). When the CN- group is part of a nitrile molecule, the name will generally contain the prefix cyano- or the suffixes -nitrile, -onitrileor carbonitrile. Nitriles are usually less toxic than cyanide salts, although they may contain some of the latter as impurities. Aliphatic nitriles can be metabolized to the free cyanide ion, making them generally more toxic than arylnitriles which are stable in the body. The cyanide unit occurs in other compounds such as cyanamide (carbodiimide, H2NC≡N), cyanoacetic acid (malonic mononitrile, N≡CH2COOH), potassium ferricyanide (K3[Fe(CN)6]) and potassium ferrocyanide (K4[Fe(CN)6]), however these compounds do not release cyanide and are therefore much less toxic than simple cyanide salts or many nitriles. Cyanide salts and hydrogen cyanide are widely in industry. For example, through a process called hydrocyanation, HCN reacts with 1,4-butadiene An alkene) to form adiponitrile (1,4-dicyanobutane, hexanedinitrile, tetramethylene cyanide, NC(CH2)4CN), a chemical precursor to hexamethylene diamine (1,6-diaminohexane, H2N(CH2)6NH2), which is one of the polymers used to make nylon. A major use of cyanide salts is in gold mining. Crushed ore is sprayed with anaqueous solution of sodium cyanide, NaCN. The cyanide ion has a very high affinity for gold (Au) atoms and reacts to form the stable and soluble Au(CN)2- anion: 4 Au(s) + 8 CN-(aq) + O2(g) + 2 H2O(l)   4 Au(CN)2-(aq) + 4 OH-(aq). The gold-containing solution is easily separated from the insoluble ore and recovered as solid gold (along with other valuable metals...as well as some toxic heavy metals) by reducing the dissolved metal complexes with zinc powder: 2 Au(CN)2-(aq) + Zn(s)   Zn(CN)42-(aq) + 2 Au(s). This process is done commercially on a millions of tons scale and is a major source of water pollution. There have been multiple cases where millions of gallons of cyanide-contaminated water have breached containment dams and poisoned wide areas. MSDS Relevance: Cyanides usually appear on an MSDS in the context of incompatible materials. In general, cyanides are incompatible with acids, including even weak acids such as carboxylic acids and carbon dioxide, forming highly toxicHCN gas on contact. Cyanide salts are also generally incompatible with alkaloids, chloral hydrate, iodine, metallic salts, permanganates, chlorates and peroxides. HCN is also produced when nitrogen-containing chemicals are burned. Therefore, the MSDS may warn about HCN as well as carbon monoxide as toxic byproducts of combustion. Hydrogen cyanide gas (HCN) has a characteristic odor of almonds, although not all people are able to detect this odor. Facilities utilizing HCN or with the potential to accidentally produce HCN should not rely on odor alone to warn of dangerous levels. The first link under Additional Reading (below) has a detailed summary of precautions that industrial facilities should utilize if they handle HCN or cyanide salts. Any work involving HCN or cyanide salts should only be conducted with rigorous training, written procedures, proper engineering controls, predefined emergency procedures, an evacuation plan, and first aid training. See also: Amine, Carboxylic Acid, Cyanosis, Nitrile, Volatility